Top 10 International Stocks To Own For 2015

Valero Energy and Talisman Energy, two hedge fund favorites, have moved in opposite directions over the past few months.

NEW YORK (CNNMoney) Investors in oil stocks haven't had much to brag about as of late. Just don't tell that to Wall Street's big money players.

The top 50 hedge funds increased their exposure to the energy industry more than any other sector in the fourth quarter of last year, according to research from FactSet.

Energy bet may not have paid off: The funds plowed over two billion dollars into Whiting Petroleum (WLL), Valero Energy Corporation (VLO, Fortune 500), Talisman Energy (TLM), and Cameron International (CAM, Fortune 500).

While it's unclear when exactly the funds bought the stocks -- or whether they still even own them -- the performance of these companies has been a mixed bag.

Top 10 International Stocks To Own For 2015: Pacific Coast Oil Trust (ROYT)

Pacific Coast Oil Trust is a statutory trust formed by Pacific Coast Energy Company LP (PCEC) to own interests in the Underlying Properties. As of December 31, 2011, the Underlying Properties consisted of the proved developed reserves on the Underlying Properties, which it refers to as the Developed Properties, and all other development potential on the Underlying Properties, which it refers to as the Remaining Properties. The Underlying Properties are located in California in the Santa Maria and Los Angeles Basins. PCEC produces oil and natural gas from its Orcutt properties in the Santa Maria Basin. The production in the Orcutt oilfield is produced from formations utilizing conventional production methods.

PCEC is engaged in the production and development of oil and natural gas from properties located in California. As of December 31, 2011, PCEC held interests in approximately 276 gross (215 net) producing wells, and had proved reserves of approximately 34.1 million barrels of oil equivalent. The Underlying Properties consist of producing and non-producing interests in oil units, wells and lands located onshore in California in the Santa Maria Basin, which contains PCEC�� Orcutt properties, and the Los Angeles Basin, which contains PCEC�� West Pico, East Coyote and Sawtelle properties. As of December 31, 2011, there were 37 producing wells and six waterflood injection wells in the West Pico Unit. West Pico also includes three wells held by the Stocker JV, a joint venture between PCEC and PXP.

Advisors' Opinion:

• [By Jake L'Ecuyer]

  Pacific Coast Oil Trust (NYSE: ROYT) down, falling 7.13 percent to $16.70 after the company priced a public offering by Pacific Coast Energy Company LP and other selling unitholders of 13,500,000 trust units at a price of $17.10 per unit.

• [By Rich Duprey]

  Perpetual royalty trust�Pacific Coast Oil Trust (NYSE: ROYT  ) announced yesterday its July distribution of $0.15721�per unit. The amount of the trust's monthly distributions will fluctuate depending on the proceeds it receives from its owner, Pacific Coast Energy, as a result of actual production volumes, oil and gas prices, and development expenses.� The current distribution relates to net profits and overriding royalties generated during May 2013.

Top 10 International Stocks To Own For 2015: Cloud Peak Energy Inc(CLD)

Cloud Peak Energy Inc., through its subsidiaries, engages in coal mining operations in the Powder River Basin of the United States. It produces sub-bituminous steam coal with low sulfur content for electric utilities and industrial customers. The company owns and operates Antelope surface coal mine located to the south of Gillette, Wyoming; the Cordero Rojo surface coal mine located to the south of Gillette, Wyoming; and the Spring Creek surface coal mine located in Montana. It also owns a 50% interest in the Decker surface coal mine located in Montana. As of December 31, 2010, it had approximately 970 million tons of proven and probable reserves. The company was founded in 1993 and is headquartered in Gillette, Wyoming.

Advisors' Opinion:

• [By Tyler Crowe]

  At the same time, there are a few glimmers of hope for the coal industry. Cloud Peak Energy's (NYSE: CLD  ) balance sheet shows some characteristics that could help it survive another rough patch for coal. It may not be a great balance sheet overall, but it's certainly better than many others in the space. Tune into the following video to get Fool.com contributors Tyler Crowe and Aimee Duffy's take on a couple other coal companies that either look like they are headed for a big fall or have stronger balance sheets to weather the storm.

• [By Johanna Bennett]

  As for specific stocks, the Goldman analysts issued five ratings changes:

  Upgrade CONSOL Energy to Buy given strong production growth at its E&P segment, improving cash flow from the coal business and potential for asset sales/restructuring to help realize its SOTP value. Downgrade Arch Coal to Sell due to high leverage, peak valuations and low free cash flow levels. Neutral Ratings on Cloud Peal Energy (CLD), Alpha Natural Resources (ANR) and Walt Energy (WLT): Goldman downgrade Cloud to a Neutral given a lower production outlook and a reduced PRB price forecast. The firm upgraded Alpha and Walt to Neutral from Sell, predicting that met coal prices have bottomed.

  Arch Coal has fallen 5.7% to day to $4.26, followed by Cloud Pearl, down 3.4% to $14.68, and a 3% drop by Walt Energy to $14.10. Alpha Natural dropped 2.8% to $6.10. And CONSOL fell 0.9% to $33.46.

Top High Dividend Companies To Invest In Right Now: BMC Software Inc. (BMC)

BMC Software, Inc. develops software that provides system and service management solutions for enterprises in the United States and internationally. The company operates in two segments, Enterprise Service Management and Mainframe Service Management. The Enterprise Service Management segment offers service assurance solutions that manage availability and performance management, event management, service impact management, and capacity management; service automation solutions managing provisioning, configuration change, and compliance automation for servers, networks, applications, and databases; service support solutions, which manages service desk, incident management, service request management, problem management, asset management, service level management, change and release management, and identity management; and BMC Atrium that provides shared technologies that unify information and processes from disparate management tools, and assigns priorities to business servic es. It also offers consulting, implementation, integration, IT process design and re-engineering, and educational services related to its software products. The Mainframe Service Management segment provides mainframe data and performance management solutions that ensure the availability and reliability of the business critical data, applications, and systems; and enterprise workload automation solutions comprising CONTROL-M product line, a set of features enabling data centers to automate their complex workloads and critical business processes. The company serves manufacturers, telecommunication companies, educational institutions, retailers, distributors, hospitals, and other industries, as well as channel partners, including resellers, distributors and systems integrators directly. BMC Software, Inc. was founded in 1980 and is headquartered in Houston, Texas.

Advisors' Opinion:

• [By Tom Taulli]

  As with many other hot cloud companies, NOW stock has been a roller coaster lately. But this isn’t an issue for the company�� CEO, Frank Slootman. I met with Slootman recently, and he told me that ServiceNow could be instantly profitable if he dialed down growth. He said that would be a mistake, though, because the market opportunity is massive. His competition is mostly made up of legacy operators like BMC (BMC) and Hewlett-Packard (HPQ).

Top 10 International Stocks To Own For 2015: Art's-Way Manufacturing Co. Inc.(ARTW)

Art?s-Way Manufacturing Co., Inc., together with its subsidiaries, engages in the manufacture and sale of agricultural equipment in the United States. It offers portable and stationary animal feed processing equipment and related attachments used to mill and mix feed grains into custom animal feed rations; a crop production line that includes grain drill equipment; hay and forage equipment consisting of forage boxes, forage blowers, running gears, dump boxes, rotary rakes, finger wheel rakes, and mergers; stalk shredders; portable grain augers; manure spreaders; sugar beet harvesting equipment; land maintenance equipment; and moldboard plows, as well as provides hay blowers to original equipment manufacturers. The company also manufactures and supplies pressure steel vessels and steel containment systems for water treatment, air receivers, refineries, co-generation, chemical, petrochemical, storage tanks, agriculture, marine, refrigeration, hydro pneumatic, heavy equipmen t, pharmaceuticals, and mining industries. In addition, it provides services, such as custom CAD drawing; welding; interior linings and exterior finishing; passivation of stainless steel; hydrostatic and pneumatic testing; design, build and finishing of skids; installation of piping; and non-destructive examination and heat treating, as well as offers after-market service parts. Further, the company produces and sells modular buildings that are used for animal containment and research laboratories. Art?s-Way Manufacturing Co., Inc. sells its products through independent farm equipment dealers primarily under the Art?s-Way, Miller Pro, and Badger brand names. The company was founded in 1956 and is based in Armstrong, Iowa.

Advisors' Opinion:

• [By Monica Gerson]

  Art's-Way Manufacturing Co (NASDAQ: ARTW) is estimated to post its quarterly earnings.

  Packaging Corporation of America (NYSE: PKG) is projected to post its Q3 earnings at $0.89 per share on revenue of $831.79 million.

Top 10 International Stocks To Own For 2015: Endeavour Silver Corporation(EXK)

Endeavour Silver Corp., a mid-cap silver mining company, focuses on the growth of its silver production, reserves, and resources in Mexico and Chile. It principally holds interests in two producing silver mines in Mexico, including the Guanacevi mine, located in Durango State; and the Guanajuato mine located in Guanajuato State. Endeavour Silver Corp. was formerly known as Endeavour Gold Corp. and changed its name on September 14, 2004. The company was founded in 1981 and is headquartered in Vancouver, Canada.

Advisors' Opinion:

• [By Dan Caplinger]

  Next Monday, Endeavour Silver (NYSE: EXK  ) will release its latest quarterly results. The key to making smart investment decisions on stocks reporting earnings is to anticipate how they'll do before they announce results, leaving you fully prepared to respond quickly to whatever inevitable surprises arise. That way, you'll be less likely to make an uninformed knee-jerk reaction to news that turns out to be exactly the wrong move.

• [By The Investment Doctor]

  In this article I'll have a look at Endeavour Silver's (EXK) second quarter results. In an earlier article I was afraid the company would be free cash flow negative at a silver price of $20/oz. I'll now have a look at the financial results to see if the company indeed had a net cash outflow, and what consequence this had on its balance sheet.

Top 10 International Stocks To Own For 2015: Dassault Systemes SA (DASTY.PK)

Dassault Systemes SA provides software solutions and consulting services. The Company�� global customer base includes companies primarily in 11 industrial sectors: automotive; industrial equipment; aerospace; consumer goods; consumer packaged goods; energy; high-tech; shipbuilding; life sciences; construction, and business services. It organizes its business and markets its products and services in two types of applications: the Product Lifecycle Management (PLM) market, to support product development, production, maintenance and lifecycle management, and the Mainstream three-dimensional (3D) market, which is primarily focused on product design. Its software applications address a range of products, from apparel, consumer goods, machine parts and semiconductors to automobiles, aircraft, ships and factories. In March 2011, the Company acquired Intercim. In April 2011, the Company acquired Enginuity PLM. On March 31, 2010, it acquired the IBM PLM. On June 8, 2010, the C ompany acquired Exalead, a French company providing Search Platforms and Search-Based Applications (SBA). In June 2010, the Company acquired Geensoft, a provider of embedded systems development solutions.

The Company has developed a software applications portfolio, organized in brands, in order to provide solutions responding to the requirements of product development: Design, Realistic Simulation, Digital Manufacturing and Production, Collaborative Innovation, and Lifelike Experiences. The Company�� principal brands include SolidWorks , CATIA, SIMULIA, DELMIA, ENOVIA and Universal Services.

SolidWorks

SolidWorks applications include 3D tools to design, manage, simulate, sustain and communicate. SolidWorks include 3D Design, Data management, Simulation and Environmental assessments. SolidWorks 3D�� include complex part and assembly modeling, production drawing creation, data management, design validation and simulation of motion, f low and structural performance, environmental impact evalu! at! ion and publishing. SolidWorks Data Management solutions enable control over all design information, eliminating concerns about version control or data loss. SolidWorks simulation technology ensures the quality and performance of the design before users commit to production. SolidWorks Sustainability technology enables users to assess the environmental impact of their design to create more sustainable products.

CATIA

CATIA is the Company�� PLM solution for 3D collaborative creation. CATIA addresses the complete product development process, from early product concept specification through product in service. CATIA V6 is designed to enable the spectrum of next generation collaborative virtual design. Its product portfolio is consists of four main domains, which include systems, shape design, mechanical design and equipment engineering. CATIA Systems captures, manages, and tracks product requirements with traceability, ensuring that early requiremen ts are met accurately all along the product development cycle. CATIA Shape provides a line of surfacing, reverse engineering, and visualization solutions to create, modify, and validate any type of complex shapes and help streamline the transition and collaboration among industrial designers. CATIA Mechanical delivers a collaborative and flexible design environment with concurrent engineering and change management through relational design. CATIA Equipment provides an integrated environment that enables the collaborative detailed design of electronic, electrical, and fluidic systems in context of a virtual product.

SIMULIA

SIMULIA provides a scalable portfolio of realistic simulation solutions designed to enable companies across a range of industries to improve product performance, reduce the number of physical prototypes and drive innovation. SIMULIA�� V6 portfolio spans include finite element analysis, multi-physics solutions, optimization analy sis, and simulation lifecycle management. Its finite e! lement! a! nalysis! software companies are able to create and test virtual prototypes of products and processes. Its multi-physics solutions enable companies to reach beyond the boundaries of a single domain. SIMULIA also provides design exploration and optimization technology, enabling designers and engineers to perform rapid trade-off studies of real-world behavior and accelerate product development. SIMULIA offers simulation lifecycle management, based upon the Company�� ENOVIA architecture offering an open collaborative platform for management of simulation data, processes and intellectual property.

DELMIA

DELMIA covers the Company�� PLM digital manufacturing solutions ranging from virtual process definition, workcell set-up, optimization, scheduling, and operation, to maintenance of real-time production systems. DELMIA V6 covers four principal domains, including Manufacturing planning, with 3D process and resource planning tools for creating and optimizing bu ild-to-order and lean production manufacturing systems; plant and resources engineering, with tools to virtually define and optimize manufacturing assets concurrently with manufacturing planning; program and control engineering, to virtually program, validate and simulate manufacturing systems for the virtual commissioning of production facilities, and control and production execution, which offers an accurate virtual production system to enable companies to track real time production activities, perform schedule changes, launch new programs and introduce model changeovers, and schedule maintenance operations.

ENOVIA

ENOVIA addresses business process needs across a broad spectrum of industries, managing simple, as well as engineered, complex products. The ENOVIA V6 products are organized by business processes, which include governance, global sourcing, global sourcing, and unified live collaboration. The Governance domain is designed to help compan ies launch enterprise new product introductions on! time and! ! on budget! . Governance includes these sub-processes: Requirements Management, Portfolio Configuration, Program Management, Decision Support Business Intelligence, and Compliance. The Global Sourcing domain allows companies to leverage supply chain capabilities throughout the product lifecycle. The IP Lifecycle domain helps eliminate costly product development errors as it is designed to enable improved cross-functional product design, manufacturing planning and performance simulation. The Unified Live Collaboration domain allows companies to deploy product lifecycle processes across the extended enterprise by providing a single, real-time view of information protocol (IP) across all business process domains, collaborative process management capabilities, and a service-oriented architecture that integrates with other enterprise system

The Company competes with Parametric Technology Corporation, ANSYS, Inc., MSC Software Corporation, Oracle Corporation, SAP AG, Siemens PLM Software, Adobe, Altair Engineering, Autonomy, Aveva, Bentley, Google, Intergraph, MathWorks, Nemetschek AG, Right Hemisphere, and Autodesk, Inc.

Advisors' Opinion:

• [By Markus Aarnio]

  Autodesk's competitors include Adobe Systems (ADBE), Dassault Systemes SA (DASTY.PK), and Parametric Technology Corporation (PMTC). Here is a table comparing these companies.

Top 10 International Stocks To Own For 2015: Medley Capital Corporation (MCC)

Medley Capital Corporation is a business development company. The fund seeks to invest in privately negotiated debt and equity securities of small and middle market companies. It targets private debt transactions ranging in size from $10 million to $50 million to borrowers principally located in North America. It structures its investments as first lien senior secured loans, second lien senior secured loans, senior secured notes, senior subordinated notes, unitranche loans, and seeks warrants or other equity participation. The fund may take a board seat on its investee companies and exits its investments between three years and seven years.

Advisors' Opinion:

• [By Nathan Slaughter]

  All of this is to say that while I strive to hunt down and recommend attractive securities with double-digit yields -- and own a few, like Medley Capital Corp. (NYSE: MCC) -- they are the exception in this environment, not the rule.

Top 10 International Stocks To Own For 2015: PowerShares DB Agriculture Fund (DBA)

PowerShares DB Agriculture Fund (the Fund) is a separate series of PowerShares DB Multi-Sector Commodity Trust (the Trust). The Fund�� subsidiary is DB Agriculture Master Fund (the Master Fund), a separate series of DB Multi-Sector Commodity Master Trust (the Master Trust). The Fund offers common units of beneficial interest (the Shares) only to certain eligible financial institutions (the Authorized Participants) in one or more blocks of 200,000 Shares, called a Basket. The proceeds from the offering of Shares are invested in the Master Fund. The proceeds from the offering of Shares are invested in the Master Fund.

The Master Fund invests with a view to tracking the changes, whether positive or negative, in the level of the Deutsche Bank Liquid Commodity Index Diversified Agriculture Excess Return (DBLCI Diversified Agriculture ER (the Index)) plus the excess, if any, of the Master Fund�� income from its holdings of United States Treasury Obligations and other short-term fixed income securities over the expenses of the Fund and the Master Fund. The Index is calculated to reflect the change in market value of the agricultural sector. The commodities comprising the Index are corn, soybeans, wheat, kansas city wheat, sugar, cocoa, coffee, cotton, live cattle, feeder cattle and lean hogs (the Index Commodities). The Master Fund also holds United States Treasury Obligations and other short-term fixed income securities for deposit with the Master Fund�� commodity broker as margin. The Index is composed of notional amounts of each of the underlying Index Commodities.

DB Commodity Services LLC serves as the managing owner, commodity pool operator and commodity trading advisor of the Fund and the Master Fund. The Bank of New York Mellon serves as the administrator of the Fund and the Master Fund.

Advisors' Opinion:

• [By Tim Gallagher]

  In a loosely related write-up, "Cheap Corn, Weak Wheat, Stockpiles Of Soy: A Bet On The 'Softs' With A Commodity Fund," Aug. 6 2013; (includes: ADZ, AGA, AGF, CBOE, CME, DAG, ICE, MOO, PAGG, RJA), I covered the Deutsche Bank PowerShares DB (DB) Agriculture Fund. (DBA) is based on Deutsche Bank's Liquid Commodity Index Diversified Agriculture Excess Return™ and managed by DB Commodity Services LLC. This, and the other ETFs, ETNs and funds included in the byline are all decent ways to play the agriculture "softs" and livestock markets, if that's what investors want to gain more exposure to.

• [By idahansen]

  Due to the impact of The Great Recession, stocks in the agricultural sector such as Caterpillar (NYSE: CAT), The Mosiac Company (NYSE: MOS), and Potash of Saskatchewan (NYSE: POT) are trading well below highs. The exchange traded fund for the industry, DBA Power Shares, (NYSE: DBA), is down more than 17% for the last year. Despite this bearish trend, legendary investors such as Warren Buffett, George Soros, and Jim Rogers are very positive for the agriculture group. With the long term bullish outlook for the sector from the greatest investors in history, small cap stocks active in the fertilizer sector such as Sirius Minerals (LSE: SXX) and Americas Petrogas (TSX: BOE) are especially attractive.

• [By Paul Ausick]

  The PowerShares DB Agriculture fund (NYSEMKT: DBA) was trading down about 0.2% before the report, and remained flat at $25.44, in a 52-week range of $24.36 to $29.64.

Top 10 International Stocks To Own For 2015: Universal Health Realty Income Trust (UHT)

Universal Health Realty Income Trust (Trust) is a real estate investment trust (REIT). It invests in health care and human service related facilities, including acute care hospitals, behavioral healthcare facilities, rehabilitation hospitals, sub-acute facilities, surgery centers, childcare centers and medical office buildings (MOBs). As of February 29, 2012, it had 54 real estate investments or commitments located in 15 states in the United States consisting of seven hospital facilities, including three acute care, one behavioral healthcare, one rehabilitation and two sub-acute; 43 MOBs, and four preschool and childcare centers. In February, 2012, Canyon Healthcare Properties, in which it owned a 95% non-controlling ownership interest, completed the divestiture of the Canyon Springs Medical Plaza. In January, 2012, it purchased the PeaceHealth Medical Clinic, a single-tenant medical office building consisting of approximately 99,000 rentable square feet, located in Bellingham, Washington. During the year ended December 31, 2011, the Company acquired Lake Pointe Medical Arts Building, Forney Medical Plaza, Tuscan Professional Building and Emory at Dunwoody Building, and minority ownership interests held by third-party members in 11 limited liability companies (LLCs). On November 30, 2011 and December 16, 2011, eight LLCs in which it owned various non-controlling, ownership interests, completed the divestitures of medical office buildings and related real property.

As of February 29, 2012, the Company had investments in 54 facilities, located in 15 states and consisting of Southwest Healthcare System, Inland Valley Campus, McAllen Medical Center, Wellington Regional Medical Center, The Bridgeway, Kindred Hospital Chicago Central, Kindred Hospital Corpus Christi, HealthSouth Deaconess Rehabilitation Hospital, Family Doctor�� Medical Office Bldg., Kelsey-Seybold Clinic at Kings Crossing, Professional Bldgs. at Kings Crossing Building A and Building B, Chesterbrook Academy, Southern Cresce! nt Center I, Desert Valley Medical Center, Desert Springs Medical Plaza, and Santa Fe Professional Plaza. As of December 31, 2011, included in its portfolio are seven hospital facilities. During 2011, the leases with respect to these hospital facilities consisted approximately 65% of its revenue. As of December 31, 2011, these leases have fixed terms with an average of 4.4 years remaining and include renewal options ranging from one to five, five-year terms. During 2011, revenues generated from the leases on the Universal Health Services, Inc. (UHS) hospital facilities accounted for approximately 55% of its total revenue. During 2011, it had a total of 41 new or renewed leases related to the medical office buildings.

Advisors' Opinion:

• [By Dividends4Life]

  Linked here is a detailed quantitative analysis of Universal HealthRealty Income Trust (UHT). Below are some highlights from the above linked analysis:

Top 10 International Stocks To Own For 2015: Iliad SA (ILIAF.PK)

Iliad SA is a France-based holding company active in the integrated telecommunications sector. The Company provides Internet access services, hosting services and others. Iliad SA is also focused on fixed-line telephony services and the provision of wireless fidelity (WiFi) cards, among several others. In addition, Iliad SA sells via Internet a range of insurance policies. As of December 31, 2012, the Company had a number of subsidiaries, which include Free SAS, Centrapel SAS, Freebox SAS, Telecom Academy SARL, Free Frequences SAS, Iliad 1 SAS, Iliad 2 SAS, Protelco SAS, IFW SAS, IRE SAS, Management Centre De Relation Abonne (MCRA), F Distribution SAS, and Centrapel SAS, among others. Its Fixe subsidiary is a landline business-provider of broadband Internet services. As of year-end 2012, the Company was active as a operator in more than 35 countries. Advisors' Opinion:

• [By Mike Arnold]

  I normally don't look at charts much, but comparing Orange to its competitors in the French telecommunications market is quite fascinating. As one can see, incumbents Bouygues (BOUYF.PK) and Vivendi (VIVHY.PK) (owner of SFR) saw similar price declines. The market, on the other hand, rapidly bid up the price of new entrant Iliad SA (ILIAF.PK), as a result of forecasts for Iliad to capture significant mobile market share (which it did, around 10%). The wide divergence in price relative to changes in underlying value favor going long the incumbents, including Orange. Because this time it's different.